MIC80 Rebar Fixz Hybrid Mortar Injection System [380ML]

Chemical Anchor

Chemical Anchor

Showing all 11 results

  • 0 out of 5

    MIC80 Rebar Fixz Hybrid Mortar Injection System [380ML]

    RM66.00

    MIC80 – 380ml

    FEATURES

    • Co-axial cartridges with self mixing action.
    • Flexible embedment depth.
    • Close anchor spacing and edge distance applications.
    • Excellent resistance to dynamic and cyclic loadings.
    • Chemical resistance to many types of contaminant agents.
    • Can apply to all directional holes.
    Quick View
  • 0 out of 5

    EAC80 Vinylester Styrene Free Injection System [380ML]

    RM66.00

    EAC80 – 380ML

    FEATURES

    • Co-axial cartridges with self mixing action.
    • Flexible embedment depth.
    • Close anchor spacing and edge distance applications.
    • Excellent resistance to dynamic and cyclic loadings.
    • Chemical resistance to many types of contaminant agents.
    • Can apply to all directional holes.
    Quick View
  • 0 out of 5

    EPC80 High-Performance Hybrid Epoxy Injection System [650ML]

    RM140.00

    EPC80 – 650ML

    FEATURES

    • Especially suitable for high load application.
    • Highly recommended for large size rebar fixings.
    • Recommended for threaded stud up to M39 in diameter.
    • Close anchor spacing and edge distance applications.
    • Excellent resistance to dynamic and cyclic loadings.
    • High chemical and temperature resistances.
    • Can be used in dry and wet concrete.
    • Suitable for diamond core hole.
    Quick View
  • 0 out of 5

    EPG65 High Strength Epoxy Injection System [650ML]

    RM110.00

    EPG65 – 650ML

    FEATURES

    • High load capacity for wide range of base material.
    • Suitable for close edge and close anchor spacing.
    • Suitable for cored and oversized holes.
    • Low shrinkage and low chemical wastages.
    • Extended working time ideally for tropical climate.
    • Ideal for damp hole application.
    Quick View
  • 0 out of 5

    VAP Spin Glass Capsules

    RM6.30RM17.30

    VAP SPIN GLASS CAPSULE

    FEATURES

    • Totally encapsulated system, excellent for “onehole to one-capsule” application.
    • Stress-free anchoring, suitable for close anchoring spacing and edge distance.
    • Fast curing and can be used in horizontal fixings.
    • Excellent resistance to dynamic loading.
    • Can be apply in dry and wet concrete without loss of perfomance.
    • High load and high efficient in series application.
    • ETA approval for use in non-cracked concrete.
    Quick View
  • 0 out of 5

    HP Hammer Glass Capsules

    RM6.80RM18.00

    HP HAMMER GLASS CAPSULE

    FEATURES

    • Totally encapsulated system, excellent for “onehole to one-capsule”application.
    • Stress-free anchoring, suitable for close edge and tight spacing applications.
    • No special tool needed for installation except a hammer.
    • Speedy installation for rebar and threaded stud.
    • Suitable for high dynamic loading in solid substrate.
    • High efficiency in series installation, highly recommended for floor and wall fixings.
    Quick View
  • 0 out of 5

    [VA] Chemical Stud Rods (ZP)

    RM2.00RM18.00

    FEATURES:

    • Use with injection chemical or glass capsules.
    • Choose an appropriate size for loading requirements.
    • Zinc galvanised is highly recommended for indoor applications.
    • Refer to techincal data sheet for loading performance.
    Quick View
  • 0 out of 5

    [VA] Chemical Stud Rods (HDG)

    RM2.60RM28.50

    FEATURES:

    • Use with injection chemical or glass capsules.
    • Choose an appropriate size for loading requirements.
    • Hot dipped galvanised is highly recommended for outdoor applications.
    • Refer to techincal data sheet for loading performance.
    Quick View
  • 0 out of 5

    Nozzles & Extension

    RM1.70RM8.30

    FEATURES:

    • To extend nozzle length for a deeper drilled hole.
    • General mixing nozzle suitable is for all types of cartridges.
    • Medium length mixing nozzle is suitable for all types of cartridges.
    • Long length mixing nozzle is suitable for all types of cartridges.
    Quick View
  • 0 out of 5

    Dispensing Hand Gun

    RM0.30RM1,260.00

    FEATURES

    • GZ30 – Dispensing handgun for 300ml single cartridge.
    • GZ80 –  Dispensing handgun for 380ml co-axial cartridge.
    • GZ65 – Dispensing metal handgun for 650ml side-by-side cartridge.
    • GZ65N – Dispensing nylon handgun for 650ml side-by-side cartridge.
    • GZ65B – Cordless dispensing handgun for 650ml side-by-side cartridge.
    Quick View
  • 0 out of 5

    Chemical Accessories

    RM2.70RM55.50

    FEATURES:

    • To manually blow out dust on drilled hole.
    • For hollow block or perforated masonry application.
    • Choose appropriate sleeve size to suit stud size.
    • To clean debris or dust from drilled hole.
    • Choose appropriate brush size with respective to the drilled hole size.
    Quick View
Top
X